Chapter 17      International Cross References - Carbon & Alloy Steels

 [ Back ] [ Home ] [ Up ] [ Table of Contents ] [ Next ]

 GERMAN CROSS REFERENCES FOR CARBON STEELSa

 Nearest

 

 

 

 

 

 

 
 SAE Gr DIN Number C Si Mn P S Others
 1008 1.0010, D9 0.10 0.30 0.50 0.070 0.060 ---
 1013 1.0036, USt 37-2 0.17 --- 0.20-0.50 0.050 0.050 0.007 N
 1013 1.0037, St 37-2 0.17 0.30 0.20-0.50 0.050 0.050 0.009 N
 1013 1.0038, RSt 37-2 0.17 0.03-0.30 0.20-0.50 0.050 0.050 0.009 N
 1013 1.0055, USt 34-1 0.17 --- 0.20-0.50 0.080 0.050 ---
 1013 1.0057, RSt 34-1 0.17 0.03-0.30 0.20-0.50 0.080 0.050 ---
 1013 1.0116, St 37-3 0.17 0.03-0.30 0.20-0.50 0.040 0.040 ---
 1010 1.0204, UQSt 36 0.13 --- 0.25-0.50 0.040 0.040 ---
 1013 1.0218, RSt 41-2 0.11-0.17 0.03-0.25 0.40-0.60 0.040 0.040 ---
 1013 1.0219, St 41-3 0.11-0.17 0.03-0.30 0.40-0.60 0.040 0.040 0.020-0.040 Al
 1005 1.0288, D5-2 0.06 --- ` 0.030 0.030 ---
 1010 1.0301, C10 0.07-0.13 0.15-0.35 0.30-0.60 0.045 0.045 ---
 1005 1.0303, QSt 32-2 0.06 0.10 0.20-0.40 0.040 0.040 0.02 Al
 1013 1.0307, StE 210-7 0.17 0.45 0.35 0.040 0.035 ---
 1013 1.0309, St 35-4 0.17 0.10-0.35 0.40 0.050 0.050 0.007 N
 1006 1.0311, D7-1 0.08 --- 0.45 0.060 0.050 ---
 1005 1.0312, D5-1 0.06 0.10 0.40 0.040 0.050 ---
 1006 1.0313, D8-2 0.08 --- 0.45 0.040 0.040 ---
 1005 1.0314, D6-2 0.06 --- 0.40 0.040 0.040 ---
 1013 1.0315, St 37-8 0.17 0.10-0.35 0.40-0.80 0.040 0.040 ---
 1006 1.0317, RSD4 0.03-0.070 0.07-0.17 0.50-0.70 0.025 0.025 0.025 Cu
 1008 1.0318, St 28 0.13 --- --- 0.050 0.050 ---
 1013 1.0319, RRStE210-7 0.17 0.45 0.35 0.040 0.035 0.020 Al
 1008 1.0320, St 22 0.10 --- 0.20-0.45 0.035 0.035 0.007 N
 1006 1.0321, St 23 0.08 --- 0.20-0.40 0.025 0.025 0.007 N
 1008 1.0322, USD8 0.06-0.10 --- 0.45-0.65 0.030 0.030 0.12Cr, 0.12Ni, 0.17Cu
0.007 N

 Nearest

 

 

 

 

 

 

 
 SAE Gr DIN Number C Si Mn P S Others
 1008 1.0326, RSt 28 0.10 0.05 0.45 0.030 0.030 0.025 Al
 1010 1.0328, USD10 0.08-0.12 --- 0.50-0.70 0.030 0.030 0.007 N
 1008 1.0330, St2; St12 0.10 --- --- --- --- 0.007 N
 1008 1.0331, RoSt2 0.10 --- 0.30-0.60 0.045 0.045 0.007 N
 1008 1.0332, StW22 0.10 --- 0.20-0.45 0.035 0.035 0.007 N
 1008 1.0333, St3; St13 0.10 --- --- --- --- 0.007 N
 1006 1.0334, StW23 0.08 --- 0.20-0.40 0.025 0.025 0.007 N
 1006 1.0335, StW24 0.08 0.03-0.10 0.40 0.025 0.025 ---
 1008 1.0336, St 4; USt 14 0.09 --- 0.25-0.60 0.030 0.030  
 1008 1.0337, RoSt 4 0.10 0.10 0.30-0..60 0.030 0.035
 1008 1.0344, St 12 Cu3 0.10 --- 0.20-0.45 0.050 0.050 0.25-0.35 Cu, 0.008 N
 1008 1.0347, RRSt 13 0.10 0.03-0.10 0.40 0.025 0.025 0.020 Al, 0.007 N
 1010 1.0349, RSD 9 0.08-0.12 0.03-0.08 0.50-0.70 0.025 0.025 0.007 N
 1013 1.0356, TTSt 35 0.17 0.35 0.40 0.045 0.045 ---
 1008 1.0357, USt 28 0.10 --- 0.45 0.030 0.030 ---
 1008 1.0359, RRSt 23 0.10 0.03-0.10 0.40 0.025 0.025 0.007 N
 1008 1.0375, Feinstblech T57 0.10 --- 0.25-0.45 0.040 0.040 0.007 N
 1006 1.0354, St 14 Cu 3 0.08 0.03-0.10 0.40 0.025 0.025 0.02 Al, 0.25-0.35 Cu,
0.007 N
 1008 1.0377, Feinstblech T61 0.10 --- 0.25-0.45 0.050 0.040 0.007 N
 1008 1.0378, Feinstblech T65 0.10 --- 0.25-0.50 0.050 0.040 0.007 N
 1008 1.0379, Feinstblech T70 0.10 --- 0.25-0.50 0.060 0.040 0.007 N
 1008 1.0385, Weissblech T57 0.10 --- 0.25-0.45 0.040 0.040 0.007 N
 1008 1.0387, Weissblech T61 0.10 --- 0.25-0.50 0.050 0.040 0.007 N
 1008 1.0388, Weissblech T65 0.10 --- 0.25-0.50 0.050 0.040 0.007 N
 1008 1.0389, Weissblech T70 0.10 --- 0.25-0.50 0.060 0.040 ---

 Nearest

 

 

 

 

 

 

 
 SAE Gr DIN Number C Si Mn P S Others
 1006 1.0391, EK2 0.08 --- --- --- --- 0.007 N
 1006 1.0392, EK4 0.08 --- --- --- --- 0.020 Al
 1005 1.0393, ED3 0.04 --- --- --- --- 0.007 N
 1005 1.0394, ED4 0.04 --- --- --- --- 0.020 Al
 1015 1.0401, C15 0.12-0.18 0.15-0.35 0.30-0.60 0.045 0.045 ---
 1020 1.0402, C22 0.18-0.25 0.15-0.35 0.30-0.60 0.045 0.045 ---
 1025 1.0406, C25 0.22-0.29 0.40 0.40-0.70 0.045 0.045 ---
 1527 1.0412, 27MnSi5 0.24-0.30 0.30-0.55 1.10-1.60 0.040 0.040 0.020-0.050 Al
 1020 1.0414, D20-2 0.18-0.23 0.10-0.30 0.30-0.60 0.040 0.040 ---
 1025 1.0415, D25-2 0.23-0.28 0.10-0.30 0.30-0.60 0.040 0.040 ---
 1025 1.0415, D26-2 0.23-0.28 0.10-0.30 0.30-0.60 0.040 0.040 ---
 1013 1.0417 0.17 0.35 0.70 0.045 0.045 ---
 1016 1.0419, RSt44-2 0.18 0.45 0.80 0.050 0.050 0.008 N
 1513 1.0424, Schiffbaustahl 0.16 0.10-0.35 1.00-1.35 0.040 0.040 0.015-0.060 Al
  CS:DS            
 1020 1.0427, C22-3 0.18-0.23 0.15-0.35 0.30-0.60 0.045 0.045 0.30 Cr
 1012 1.0439,RSD13 0.10-0.16 0.03-0.35 0.65-0.85 0.025 0.025 0.007 N
 1018 1.0453, C16-8 0.14-0.19 0.15-0.35 0.40-0.80 0.040 0.040 0.30 Cr
 1013 1.0457, StE240-7 0.17 0.45 0.40 0.040 0.035 ---
 1016 1.0467, 15Mn3 0.12-0.18 0.10-0.20 0.70-0.90 0.040 0.040 ---
 1016 1.0468, 15Mn3Al 0.12-0.18 0.10-0.20 0.70-0.90 0.040 0.040 0.020-0.050 Al
 1522 1.0471, 21MnSi5 0.18-0.24 0.10-0.35 1.10-1.60 0.040 0.040 0.020-0.04 Al
 1513 1.0479, 13Mn6 0.08-0.14 0.30-0.45 1.35-1.65 0.025 0.025 ---
 1513 1.0496, 12Mn6 0.08-0.14 0.08-0.22 1.35-1.65 0.025 0.025 0.030 Al
 1524 1.0499, 21Mn6Al 0.18-0.25 0.15-0.25 1.40-1.80 0.035 0.030 0.20 Cu, 0.030 Al
 1035 1.0501, C35 0.32-0.39 0.40 0.50-0.80 0.045 0.045 ---

 Nearest

 

 

 

 

 

 

 
 SAE Gr DIN Number C Si Mn P S Others
 1045 1.0503, C45 0.42-0.50 0.40 0.50-0.80 0.045 0.045 ---
 1040 1.0511, C40 0.37-0.45 0.15-0.35 0.60-0.80 0.045 0.045 ---
 1513 1.0513, Schiffbaustahl A32, 0.18 1.00-1.50 0.90-1.60 0.040 0.040 0.015 Al, 0.05 Nb,
1.0514, Schiffbaustahl B32, 0.10 V
1.0515, Schiffbaustahl E32
 1035 1.0516, D35-2 0.33-0.38 0.10-0.30 0.30-0.60 0.040 0.040 ---
 1042, 1.0517, D45-2 0.43-0.48 0.10-0.30 0.30-0.70 0.040 0.040 ---
 1044
 1055 1.0518, D55-2 0.53-0.58 0.10-0.30 0.30-0.70 0.040 0.040 ---
 1037 1.0520, 31Mn4 0.28-0.36 0.20-0.50 0.80-1.10 0.045 0.045 0.020 Al
 1030 1.0528, C30 0.27-0.34 0.40 0.50-0.80 0.045 0.045 ---
 1522 1.0529, StE350-2Z 0.25   1.50 0.040 0.040 ---
 1030 1.0530, D30-2 0.28-0.33 0.10-0.30 0.30-0.60 0.040 0.040 ---
 1055 1.0535, C55 0.52-0.60 0.40 0.60-0.90 0.045 0.045 ---
 1050 1.0540, C50 0.47-0.55 0.40 0.60-0.90 0.045 0.045 ---
 1040 1.0541, D40-2 0.38-0.43 0.10-0.30 0.30-0.60 0.040 0.040 ---
 1551 1.0542, StSch80 0.45-0.63 0.50 0.80-1.80 0.050 0.050 0.007 N
 1513 1.0549 0.18 0.50 1.00-1.50 0.035 0.035 ---
 1043 1.0558, GS-60-3 0.40-0.48 0.30-0.50 0.70-0.90 0.030 0.030 ---
 1037, 1.0561, 36Mn4 0.32-0.40 0.25-0.50 0.90-1.20 0.050 0.050 0.007 N
 1536
 1029 1.0562, 28Mn4 0.24-0.32 0.15-0.35 0.90-1.20 0.050 0.050 0.007 N
 1541 1.0563, E; 1.0564, N-80 0.45 0.10-0.30 1.20 0.040 0.060 ---
 1513 1.0579 0.18 0.10-0.50 1.60 0.035 0.035 0.02 Nb
 1513 1.0583, Schiffbaustahl A36, 0.18 0.10-0.50 0.90-1.60 0.040 0.040 0.15 Al, 0.02-0.05 Nb,
  1.0584, Schiffbaustahl D36, 0.05-0.10 V
1.0589, Schiffbaustahl E36

 Nearest

 

 

 

 

 

 

 
 SAE Gr DIN Number C Si Mn P S Others
 1513 1.0599 0.15 0.50 1.70 0.030 0.030 ---
 1060 1.0601, C60 0.57-0.65 0.15-0.35 0.60-0.90 0.045 0.045 ---
 1070 1.0603, C67 0.65-0.72 0.40 0.60-0.90 0.045 0.045 ---
 1074 1.0605, C75 0.70-0.80 0.15-0.35 0.60-0.80 0.045 0.045 ---
 1059 1.0609, 058-2 0.55-0.60 0.10-0.30 0.30-0.70 0.040 0.040 ---
 1059 1.0610, D60-2 0.58-0.63 0.10-0.30 0.30-0.70 0.040 0.040 ---
 1059, 1.0611, D63-2 0.60-0.65 0.10-0.30 0.30-0.70 0.040 0.040 ---
 1064
 1064 1.0612, D65-2 0.63-0.68 0.10-0.30 0.30-0.70 0.040 0.040 ---
 1064 1.0613, D68-2 0.65-0.70 0.10-0.30 0.30-0.70 0.040 0.040 ---
 1075 1.0614, D75-2 0.73-0.78 0.10-0.38 0.30-0.70 0.040 0.040 ---
 1086 1.0616, C85; D85-2 0.83-0.90 0.10-0.30 0.30-0.70 0.040 0.040 ---
 1069, 1.0617, D73-2 0.70-0.75 0.10-0.30 0.30-0.70 0.040 0.040 ---
 1075
 1095 1.0618, D95-2 0.90-0.99 0.10-0.30 0.30-0.70 0.040 0.040 ---
 1075, 1.0620, D78-2 0.75-0.80 0.10-0.30 0.30-0.70 0.040 0.040 ---
 1078
 1078 1.0622, D80-2 0.78-0.83 0.10-0.30 0.30-0.70 0.040 0.040 ---
 1552 1.0624, StSch90 0.50-0.70 0.50 1.30-1.70 0.050 0.050 ---
 1078, 1.0626, D83-2 0.80-0.85 0.10-0.30 0.30-0.70 0.040 0.040 ---
 1086              
 1065, 1.0627, C68 0.65-0.72 0.25-0.50 0.60-0.80 0.045 0.045 ---
 1069
 1086 1.0628, D88-2 0.85-0.90 0.10-0.30 0.30-0.70 0.040 0.040 ---
 1065 1.0640, 64Mn3 0.60-0.68 0.20-0.40 0.50-0.80 0.050 0.050 0.007 n
 1060 1.0642, 60Mn3 0.57-0.65 0.20-0.40 0.70-0.90 0.050 0.050 0.007 n

 Nearest

 

 

 

 

 

 

 
 SAE Gr DIN Number C Si Mn P S Others
 1070 1.0643, 70Mn3 0.65-0.75 0.20-0.40 0.60-0.90 0.050 0.050 0.007 N
 1074 1.0645, 76Mn3 0.70-0.80 0.20-0.40 0.60-0.90 0.050 0.050 0.007 N
 1085 1.0647, 85Mn3 0.80-0.90 0.15-0.35 0.70-0.90 0.050 0.050 0.007 N
 1074 1.0655, C74 0.70-0.80 0.20-0.40 0.60-0.90 0.030 0.030 ---
 1108 1.0700, U7S10 0.10 0.40-0.70 0.080 0.080 ---
 1108 1.0702, U10S10 0.15   0.40-0.70 0.050 0.08-0.12 ---
 1110 1.0703, R10S10 0.15 0.40 0.30-0.80 0.050 0.08-0.12 ---
 1212 1.0711, 9S20 0.13 0.05 0.60-1.20 0.100 0.18-0.25 ---
 1213 1.0715, 9SMn28 0.14 0.05 0.90-1.30 0.100 0.24-0.32 ---
 1212 1.0721, 10S20 0.07-0.13 0.10-0.40 0.50-0.90 0.060 0.15-0.25 ---
 1139 1.0726, 35S20 0.32-0.39 0.10-0.40 0.50-0.90 0.060 0.15-0.25 ---
 1146 1.0727, 45S20 0.42-0.50 0.10-0.40 0.50-0.90 0.060 0.15-0.25 ---
 1151 1.0728, 60S20 0.57-0.65 0.10-0.40 0.50-0.90 0.060 0.15-0.25 ---
 1151 1.0729, 70S20 0.60-0.72 0.15-0.25 0.50-0.70 0.070 0.15-0.25 ---
 1213, 1.0736, 9SMn36 0.15 0.05 1.00-1.50 0.100 0.32-0.40 ---
 1215
 1213 1.0740, 9SMn40 0.14 0.10-0.40 1.00-1.50 0.070 0.35-0.45 ---
 1008 1.0744, 6P10 0.09   0.20-0.45 0.08-0.15 0.050 ---
 1561 1.0908, 60SiMn5 0.55-0.65 1.00-1.30 0.90-1.10 0.050 0.050 0.007 N
 1006 1.1009, Ck7 0.08 0.15 0.50 0.035 0.035 ---
 1212 1.1011, RFe 160K 0.10 0.10 0.50-0.90 0.080 0.18-0.27 0.04-0.10 Al
 1005 1.1012, Fe 120 0.05 --- 0.20-0.35 0.030 0.035 0.04-0.10 Al
 1008 1.1116, USD6 0.06-0.10 --- 0.45-0.65 0.020 0.020 0.12Cr, 0.12Ni, 0.17Cu
 1522 1.1120, GS-20Mn5 0.23 0.60 1.00-1.50 0.025 0.020 0.30Cr, 0.20Ni, 0.10Mo
 1010 1.1121, Ck10, 1122, Cq10 0.07-0.13 0.15-0.35 0.30-0.60 0.035 0.035 ---
 1541 1.1127, 36Mn6 0.34-0.42 0.15-0.35 1.40-1.65 0.035 0.035 ---

 Nearest

 

 

 

 

 

 

 
 SAE Gr DIN Number C Si Mn P S Others
 1548 1.1128, 46Mn5 0.42-0.48 0.25-0.45 1.15-1.35 0.035 0.035 ---
 1015 1.1132, CQ15 0.12-0.18 0.15-0.35 0.25-0.50 0.035 0.035 ---
 1022, 1.1133, 20Mn5, 0.17-0.23 0.0.30-0.60 1.00-1.30 0.035 0.035 ---
 1524 1.1133, GS-20Mn5            
 1022 1.1134, Ck19 0.15-0.23 0.15 0.40-0.60 0.030 0.025 0.15Cr, 0.15Cu,
              0.03-0.08Al
 1015 1.1135, Ck16Al 0.13-0.18 0.15 0.40-0.60 0.025 0.025 0.15Cu, 0.007N,
              0.03-0.08Al
 1522 1.1138, GS-21Mn5 0.17-0.23 0.65 1.00-1.30 0.025 0.020 0.30Cr
 1015 1.1140, Cm15 0.12-0.18 0.15-0.35 0.30-0.60 0.035 0.020-0.035 ---
 1015 1.1141, Ck15 0.12-0.18 0.15-0.35 0.30-0.60 0.035 0.035 ---
 1016 1.1142, GS-Ck15 0.12-0.19 0.30-0.50 0.50-0.80 0.030 0.030 0.30Cr, 0.007N
 1015 1.1144 0.12-0.18 0.15-0.35 0.25-0.50 0.035 0.035 0.007N
 1015 1.1148, Ck15Al 0.12-0.18 0.15-0.35 0.25-0.50 0.035 0.035 0.003Al, 0.007N
 1020 1.1149, Cm22 0.17-0.24 0.40 0.30-0.60 0.035 0.020-0.035 ---
 1023 1.1150, Ck22-8 0.18-0.25 0.15-0.35 0.30-0.60 0.035 0.035 0.30Cr
 1020 1.1151, Ck22 0.17-0.24 0.40 0.30-0.60 0.035 0.030 ---
 1023 1.1152, Cq22 0.18-0.24 0.15-0.35 0.30-0.60 0.035 0.035 ---
 1026 1.1155, GS-Ck25 0.20-0.28 0.30-0.50 0.50-0.80 0.035 0.035 ---
 1025 1.1158, Ck25 0.22-0.29 0.40 0.40-0.70 0.035 0.035 ---
 1026 1.1156, GS-Ck24 0.20-0.28 0.30-0.50 0.50-0.80 0.030 0.030 0.30Cr,0.007N
 1046, 1.1159, GS-46Mn4 0.42-0.50 0.25-0.50 0.90-1.20 0.045 0.045 ---
 1548              
 1524 1.1160, 22Mn6 0.18-0.25 0.15-0.30 1.30-1.65 0.035 0.035 ---
 1527 1.1161, 26Mn5 0.22-0.29 0.15-0.30 1.20-1.50 0.035 0.035 ---
 1527 1.1105, GS-30Mn5 0.27-0.34 0.30-0.50 1.20-1.50 0.035 0.035 ---
 1527, 1.1165, 30Mn5 0.27-0.34 0.15-0.40 1.20-1.50 0.035 0.035 0.30Cr
 1536              

 Nearest

 

 

 

 

 

 

 
 SAE Gr DIN Number C Si Mn P S Others
 1536 1.1166, 34Mn5 0.30-0.37 0.15-0.30 1.20-1.50 0.035 0.035 ---
 1536 1.1167, 36Mn5, 0.32-0.40 0.15-0.30 1.20-1.50 0.035 0.035 ---
  1.1167, GS-36Mn5            
 1541 1.1168, GS-40Mn5 0.36-0.44 0.30-0.50 1.20-1.50 0.035 0.035 ---
 1522 1.1169, 20Mn6 0.17-0.23 0.30-0.60 1.30-1.60 0.035 0.035 ---
 1527 1.1170, 28Mn6 0.25-0.32 0.15-0.40 1.30-1.65 0.035 0.035 0.30Cr
 1035 1.1172, Cq35 0.32-0.39 0.15-0.35 0.50-0.80 0.035 0.035 ---
 1035 1.1173, Ck34 0.31-0.38 0.20 0.45-0.55 0.025 0.025 0.007N
 1030 1.1178, Ck30 0.27-0.34 0.40 0.50-0.90 0.035 0.035 ---
 1030 1.1179, Cm30 0.27-0.34 0.40 0.50-0.90 0.035 0.020-0.035 ---
 1035 1.1180, Cm35 0.32-0.39 0.40 0.50-0.80 0.035 0.020-0.035 ---
 1035 1.1181, Ck35 0.32-0.39 0.15-0.30 0.50-0.80 0.035 0.035 ---
 1045 1.1184, Ck46 0.42-0.50 0.15-0.35 0.50-0.80 0.025 0.025 ---
 1040 1.1186, Ck40 0.37-0.43 0.15-0.35 0.50-0.80 0.035 0.035 ---
 1040 1.1189, Cm40 0.37-0.44 0.40 0.50-0.80 0.035 0.020-0.035 ---
 1039 1.1190, Ck42Al 0.39-0.44 0.25-0.40 0.75-0.90 0.035 0.035 0.007N
 1045 1.1191, Ck45; GS-Ck45 0.42-0.50 0.15-0.35 0.50-0.80 0.035 0.035 ---
 1045 1.1191, Cq45, 0.42-0.50 0.15-0.35 0.50-0.80 0.035 0.035 ---
  1.1194, Cq45,            
  1.1201, Cm45            
 1045 1.1193, Cf45 0.43-0.49 0.15-0.45 0.50-0.80 0.025 0.025 ---
 1050, 1.1202, D53-3 0.50-0.55 0.10-0.30 0.30-0.70 0.030 0.030 ---
 1055             ---
 1055 1.1203, Ck55 0.52-0.62 0.40 0.60-0.90 0.035 0.035 ---
 1050 1.1206, Ck50 0.47-0.55 0.40 0.60-0.90 0.035 0.035 ---
 1055 1.1209, Cm55 0.52-0.60 0.15-0.35 0.60-0.90 0.035 0.020-0.035 ---

 Nearest

 

 

 

 

 

 

 
 SAE Gr DIN Number C Si Mn P S Others
 1050, 1.1210, Ck53 0.50-0.57 0.15-0.35 0.40-0.70 0.035 0.035 0.007N
 1053,              
 1055              
 1059 1.1212, D58-3 0.55-0.60 0.10-0.30 0.30-0.70 0.030 0.030 ---
 1050, 1.1213, Cf53 0.50-0.57 0.15-0.35 0.40-0.70 0.025 0.035 ---
 1053,              
 1055              
 1055 1.1220, D55-3 0.53-0.58 0.10-0.30 0.30-0.70 0.030 0.030 ---
 1050, 1.1219, Cf54 0.50-0.57 0.35 0.60-0.90 0.035 0.035 0.30Cu
 1053,              
 1055              
 1060 1.1221, Ck60 0.57-0.65 0.15-0.35 0.60-0.90 0.035 0.035 ---
 1059, 1.1222, D63-3 0.60-0.65 0.10-0.30 0.30-0.70 0.030 0.030 ---
 1064              
 1060 1.1223, Cm60 0.57-0.65 0.40 0.60-0.90 0.030 0.020-0.035 ---
 1552 1.1226, 52Mn5 0.47-0.55 0.15-0.30 1.20-1.50 0.035 0.035 ---
 1059 1.1228, D60-3 0.58-0.63 0.10-0.30 0.30-0.70 0.030 0.030 ---
 1065 1.1239 Federstahldraht FD 0.60-0.70 0.25 0.50-0.90 0.030 0.030 0.12Cr
 1070 1.1231, Ck67 0.65-0.72 0.15-0.35 0.60-0.90 0.030 0.030 ---
 1069 1.1232, D68-3 0.65-0.70 0.10-0.30 0.30-0.70 0.030 0.030 ---
 1065 1.1233 0.60-0.70 0.20-0.65 0.70-1.20 0.035 0.035 ---
 1064 1.1236, D65-3 0.63-0.68 0.10-0.30 0.30-0.70 0.030 0.030 ---
 1069 1.1237 0.65-0.75 0.15-0.30 0.70 0.030 0.030 ---
 1065, 1.1240, 65Mn4 0.60-0.70 0.25-0.50 0.90-1.20 0.035 0.035 ---
 1566              
 1050 1.1241, Cm50 0.47-0.55 0.40 0.60-0.90 0.035 0.020-0.040 ---

 Nearest

 

 

 

 

 

 

 
 SAE Gr DIN Number C Si Mn P S Others
 1074, 1.1242, D73-3 0.70-0.75 0.10-0.30 0.30-0.70 0.030 0.030 ---
 1075              
 1069 1.1249, Cf70 0.68-0.75 0.15-0.35 0.20-0.35 0.025 0.035 0.007N
 1065 1.1250, Federstahldraht FD 0.60-0.70 0.25 0.50-0.90 0.030 0.020 0.060Cu
 1069 1.1251, D70-3 0.68-0.73 0.10-0.30 0.30-0.70 0.030 0.030 ---
 1075, 1.1252, D78-3 0.75-0.80 0.10-0.30 0.30-0.70 0.030 0.030 ---
 1078              
 1075, 1.1253, D75-3 0.73-0.78 0.10-0.30 0.30-0.70 0.030 0.030 ---
 1078              
 1078 1.1255, D80-3 0.78-0.83 0.10-0.30 0.30-0.70 0.030 0.030 ---
 1080 1.1259, 80Mn4 0.75-0.85 0.25-0.50 0.90-1.20 0.035 0.035 ---
 1065 1.1260, 66Mn4 0.60-0.71 0.15-0.30 0.85-1.15 0.035 0.035 ---
 1506 1.1260, 66Mn7 0.60-0.71 0.15-0.30 0.85-1.15 0.035 0.035 ---
 1078, 1.1262, D83-3 0.80-0.85 0.10-0.30 0.30-0.70 0.030 0.030 ---
 1086              
 1080 1.1265, D85-2 0.83-0.88 0.10-0.30 0.30-0.70 0.030 0.030 ---
 1086 1.1265, D85-3 0.83-0.88 0.10-0.30 0.30-0.70 0.030 0.030 ---
 1086 1.1269, Ck85 0.80-0.90 0.15-0.35 0.45-0.65 0.035 0.035 0.007N
 1086 1.1272, D88-3 0.85-0.89 0.10-0.25 0.35-0.55 0.030 0.030 ---
 1090 1.1273, 90Mn4 0.85-0.95 0.25-0.50 0.90-1.10 0.035 0.035 ---
 1095 1.1274, Ck101 0.95-1.05 0.15-0.35 0.40-0.60 0.035 0.035 0.007N
 1095 1.1275, Ck100 0.98-1.05 0.15-0.25 0.25 0.025 0.025 0.007N
 1090, 1.1282, D95S3 0.90-0.99 0.10-0.30 0.30-0.70 0.030 0.030 ---
 1095              
 1095 1.1291, Mk97 0.95-0.99 0.10-0.25 0.25-0.45 0.025 0.025 0.007N
 1055 1.1820, C55W 0.50-0.58 0.15 0.30-0.50 0.030 0.030 ---

 Nearest

 

 

 

 

 

 

 
 SAE Gr DIN Number C Si Mn P S Others
 1069 1.1520, C70W1 0.65-0.74 0.10-0.25 0.10-0.25 0.020 0.020 ---
 1078 1.1525, C80W1 0.75-0.85 0.10-0.25 0.10-0.25 0.020 0.020 ---
 1069 1.1620, C70W2 0.65-0.74 0.10-0.25 0.10-0.25 0.020 0.020 ---
 1060 1.1740, C60W 0.55-0.65 0.60-0.80 0.60-0.80 0.030 0.035 ---
 1095 1.1545, C105W1, 1.00-1.10 0.10-0.25 0.10-0.25 0.020 0.020 ---
  1.1645, C105W2            
 1030 1.1811, G-31Mn4 0.28-0.33 0.40-0.60 0.80-1.00 0.035 0.035 ---
 1536 1.1813, G-35Mn5 0.32-0.40 0.20-0.50 1.20-1.50 0.035 0.035 ---
 1055 1.1820, C55W 0.50-0.58 0.15 0.30-0.50 0.030 0.030 ---
 1084 1.1830, C85W 0.80-0.90 0.25-0.40 0.50-0.80 0.025 0.020 ---
 1513 1.8941, QStE260N 0.16 0.50 1.20 0.030 0.030 ---
  1.8945, QStE34ON 0.16 0.50 1.50 0.030 0.030 ---
 1513 1.8950, QStE380N 0.18 0.50 1.60 0.030 0.030 ---
 1522 1.8970, StE385.7, 0.23 0.55 1.00-1.50 0.040 0.035 0.12V, 0.020Al
  1.8972, StE415.7            
 1522 1.8978, 1.8970 0.26 0.35 1.40 0.040 0.050 ---
 a.  It is not practical to directly correlate the various metal designations from country to country, let alone comparing several countries and
 their metal designations; from the view that chemical composition may be similar, but not identical, and that manufacturing technologies may
 differ greatly. Consequently, the cross references made in this table are, at best, only listed as a guide to assist in finding comparable metal
 designations, rather than equivalent metal designations.
 
 [ Go to Top ]
 

 The Ferrous Metals Data Book

FF">1.8950, QStE380N 0.18 0.50 1.60 0.030 0.030 ---  1522 1.8970, StE385.7, 0.23 0.55 1.00-1.50 0.040 0.035 0.12V, 0.020Al   1.8972, StE415.7              1522 1.8978, 1.8970 0.26 0.35 1.40 0.040 0.050 ---  a.  It is not practical to directly correlate the various metal designations from country to country, let alone comparing several countries and  their metal designations; from the view that chemical composition may be similar, but not identical, and that manufacturing technologies may  differ greatly. Consequently, the cross references made in this table are, at best, only listed as a guide to assist in finding comparable metal  designations, rather than equivalent metal designations.    [ Go to Top ]  

 The Ferrous Metals Data Book