Chapter 17       International Cross References - Carbon & Alloy Steels

 [ Back ] [ Home ] [ Up ] [ Table of Contents ] [ Next ]

 SWEDISH CROSS REFERENCE FOR CARBON STEELSa

 Nearest

 Swedish

 

 

 

 

 

 

 SAE Gr

 Standard

C

Si

Mn

P

S

Other
 1008 1142, 1146 0.10 --- 0.50 0.040 0.040 ---
 1006 1147 0.08 --- 0.45 0.030 0.030 ---
 1005 1160 0.08 0.030 0.35 0.030 0.040 ---
 1006 1225 0.08 0.030 0.40-0.60 0.030 0.030 0.10Cr, 0.20Cu, 0.009N
 1010 1232 0.13 --- 0.30-0.70 0.050 0.050 0.25Cr, 0.30Cu, 0.009N
 1013 1233, 1234 0.17 0.10-0.40 0.50 0.050 0.050 0.20Cr, 0.30Cu, 0.009N
 1010 1265 0.07-0.13 0.30 0.25-0.45 0.030 0.040 ---
 1010 1311 0.14 0.20-0.45 0.40-0.70 0.060 0.050 ---
 1017 1312 0.20 0.050 0.40-0.70 0.050 0.050 0.009N
 1013 1330 0.17 0.15-0.40 0.40-1.00 0.050 0.050 0.25Cr, 0.30Cu, 0.009N
 1012    1332 0.10-0.14 0.15-0.40 0.50-0.80 0.040 0.040 0.25Cr, 0.40Cu, 0.009-0.015N
 1015, 1016 1370 0.12-0.18 0.10-0.40 0.50-0.90 0.035 0.035 ---
 1012 1431 0.16 0.05-0.25 0.80-1.40 0.050 0.050 0.25Cr, 0.40Cu, 0.009-0.015N
 1020 1450 0.25 0.10-0.40 0.40-0.80 0.050 0.050 ---
 1035 1550 0.28-0.40 --- 0.40-0.90 0.050 0.050 ---
 1035 1572 0.32-0.39 0.15-0.40 0.50-0.80 0.035 0.035 ---
 1045 1672 0.43-0.50 0.15-0.40 0.50-0.80 0.035 0.035 ---
 1050, 1053 1674 0.48-0.55 0.15-0.40 0.60-0.90 0.035 0.035 ---
 1060 1678 0.57-0.65 0.15-0.40 0.60-0.90 0.035 0.035 ---
 1070 1770 0.55-0.80 0.15-0.40 0.50-0.90 0.035 0.035 ---
 1074 1774 0.60-0.95 0.15-0.40 0.30-0.80 0.035 0.035 ---
 1095 1870 0.94-1.06 0.15-0.40 0.30-0.80 0.030 0.030 ---

 Nearest

 Swedish

 

 

 

 

 

 

 SAE Gr

 Standard

C

Si

Mn

P

S

Other
 1016 2101 0.20 0.10-0.50 0.80-1.60 0.050 0.050 0.25Cr, 0.30Cu, 0.009N
 1213 1912 0.14 0.050 0.90-1.30 0.110 0.24-0.35 ---
 1139 1957 0.32-0.39 0.10-0.40 0.80-1.20 0.060 0.15-0.25 ---
 1144, 1151 1973 0.46-0.54 0.10-0.40 0.80-1.20 0.060 0.15-0.25 ---
 1541 2120 0.38-0.45 0.15-0.40 1.10-1.40 0.035 0.035  ---
 1541 2128 0.43 0.10-0.40 1.20-1.80 0.050 0.050 ---
 1526 2130 0.25-0.30 0.15-0.40 1.10-1.30 0.035 0.035 0.10-0.30Cr, 0.002B
 1522 2165 0.24 0.60 1.60 0.060 0.050 ---
 1522 2168 0.28 0.60 1.60 0.060 0.050 ---
 a. It is not practical to directly correlate the various metal designations from country to country, let alone comparing several countries and
 their metal designations; from the view that chemical composition may be similar, but not identical, and that manufacturing technologies may
 differ greatly. Consequently, the cross references made in this table at\re, at best, only listed as a guide to assist in finding comparable metal
 designations, rather than the equivalent metal designations.
 
 [ Go to Top ]
 

 

 The Ferrous Metals Data Book